View PCIH47F9400A1_7248353.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 12 dimensions are in millimeters [inches]. all dimensions are subject to change. 13 2 4 41 40 39 35 38 37 34 32 29 31 28 27 30 33 36 26 23 25 22 21 24 15 17 19 11 13 16 18 20 12 14 579 6 810 42 44 43 47 46 45 47 46 45 44 43 42 36 38 37 30 32 31 33 35 34 27 24 29 28 26 25 21 23 22 41 40 39 18 16 14 12 11 13 15 17 8 10 6 5 7 9 19 20 13 4 2 33 27 32 31 30 28 29 24 25 26 23 22 21 19 20 17 15 18 16 13 11 14 12 79 5 10 8 6 34 35 37 38 36 34 35 38 37 36 31 28 22 19 25 32 29 23 20 26 21 24 30 27 33 17 15 13 11 18 16 14 12 7 5 8 6 10 9 42 1 3 3 1 4 2 3 1 2 4 19 11 9 7 5 68 10 12 17 13 15 14 16 18 20 36 38 37 21 23 22 26 24 25 29 32 27 28 30 31 35 33 34 41 39 40 44 42 43 45 46 18 17 47 47 46 45 42 44 43 38 36 37 39 40 41 33 35 34 20 29 27 28 30 32 31 24 26 25 19 21 23 22 10 9 12 16 14 13 15 11 4 6 8 5 7 3 2 1 48 49 48 49 the pcih series was developed specifically for use with compactpci in-rack modular power supplies. the pack- age size is ideal for use in all 3u and 6u based platforms. the pcih series is an excellent choice in ieee 1101.1 , ieee 1101.10 , and vita 30 applications where system power requirements have exceeded the capabilities of com- monly used power connectors. the pcih47 variant is fully compliant to the picmg 2.11 power interface specification . this specification details standardized power for use with compactpci systems. visit www.picmg.com for details. pcih38 variant pcih38r variant (inverted termination) pcih47r variant (inverted termination) pcih47 variant pcih series contact variants face view of male and rear view of female 23 size 16 power contacts and 15 size 20 signal contacts pcih49w25 variant pcih49w25r variant 23 size 16 power contacts and 24 size 22 signal contacts 25 size 16 power contacts and 24 size 22 signal contacts general product information
materials and finishes: insulator: glass-filled polyester, ul 94v-0, blue color. contacts: size 16 contacts: high conduc- tivity precision-machined copper alloy. size 20 and 22 contacts: precision-machined copper alloy. plating: gold flash over nickel. other plating options available, refer to step 7 on page 36. mounting screws: steel, zinc plated. electrical characteristics: pcih contact current ratings, per ul 1977 see temperature rise curves on page 4 for details. pcih38: size 16 power contacts: positions 36, 37, and 38: 40 amperes continuous, all contacts under load. positions 1 - 20: 28 amperes continuous, all contacts under load. size 20 signal contacts: 5 amperes nominal rating. pcih47: size 16 power contacts: positions 45, 46, and 47: 40 amperes continuous, all contacts under load. positions 1 - 20: 28 amperes continuous, all contacts under load. size 22 signal contacts: 3 amperes nominal rating. pcih49: size 16 power contacts: positions 45 through 49: 37 amperes continuous, all contacts under load. positions 1 - 20: 28 amperes continuous, all contacts under load. size 22 signal contacts: 3 amperes nominal rating. initial contact resistance; maximum: size 16 contact: 0.0007 ohms maximum. size 20 contact: 0.004 ohms maximum. size 22 contact: 0.004 ohms maximum. per iec 512-2, test 2b. insulator resistance: 5 g ohms per iec 512-2, test 3a. voltage proof: pcih38: contacts 36, 37 and 38: 3,000 v r.m.s. contacts 1 through 20: 1,500 v r.m.s. contacts 21 through 35: 1,000 v r.m.s. pcih47: contacts 45, 46, and 47: 3,000 v r.m.s. contacts 1 through 20: 1,500 v r.m.s. contacts 21 through 44: 1,000 v r.m.s. pcih49: contacts 1 through 20: 1,500 v r.m.s. contacts 45 through 49: 1,500 v r.m.s. contacts 21 through 44: 1,000 v r.m.s. creepage and clearance distance; minimum: pcih38: contact 38 to contact 36: 3.2mm [0.126 inch] contact 37 to contact 36: 3.2mm [0.126 inch] contact 38 to signal contacts: 6.4mm [0.252 inch] contact 37 to signal contacts: 6.4mm [0.252 inch] contact 38 to contact 37: 2.5mm [0.098 inch] contact 36 to signal contacts: 2.0mm [0.079 inch] pcih47: contact 47 to contact 45: 3.2mm [0.126 inch] contact 46 to contact 45: 3.2mm [0.126 inch] contact 47 to signal contacts: 6.4mm [0.252 inch] contact 46 to signal contacts: 6.4mm [0.252 inch] contact 47 to contact 46: 2.5mm [0.098 inch] contact 45 to signal contacts: 2.0mm [0.079 inch] pcih47: contact 36 to signal contacts: 2.0mm [0.079 inch] working voltage: pcih38: contacts 36, 37 and 38: 1,000 v r.m.s. contacts 1 through 20: 500 v r.m.s. contacts 21 through 35: 333 v r.m.s. pcih47: contacts 45, 46, and 47: 1,000 v r.m.s. contacts 1 through 20: 500 v r.m.s. contacts 21 through 44: 333 v r.m.s. pcih49: contacts 1 through 20: 500 v r.m.s. contacts 45 through 49: 500 v r.m.s. contacts 21 through 44: 333 v r.m.s. mechanical characteristics: blind mating system: male and female connector bodies provide ?ead-in for 1.3 mm [0.050 inch] diametral mis- alignment. polarization: provided by connector body design. removable contacts: install contact from rear of insulator; release from front of insulator. size 16, 20 and 22 female contacts feature ?losed entry design for highest reliability. removable contact retention in connector body: size 16 contacts: 67 n [15 lbs.] size 20 contacts: 45 n [10 lbs.] size 22 contacts: 27 n [6 lbs.] fixed contacts: printed board terminations, both straight and right angle (90?. size 16 female contacts feature ?losed entry design. size 20 and 22 feature rugged ?obi-d open entry contact design. ?losed entry contacts available, consult technical sales. 13 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 13 dimensions are in millimeters [inches]. all dimensions are subject to change. technical characteristics
c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 14 dimensions are in millimeters [inches]. all dimensions are subject to change. fixed contact retention in connector body: size 16 contacts: 45 n [10 lbs.] size 20 and 22 contacts: 27 n [6 lbs.] resistance to solder heat: 260?c [500?f] for 10 seconds duration per iec 512-6, test 12e, 25-watt soldering iron. sequential contact mating system: pcih38: first mate contact 36 and last mate contact positions 22, 25 and 28. pcih47 and pcih49 with mos: first mate contact 45 and last mate contact position 27. consult technical sales for customer specified sequential mating . safety ?ecessed in insulator contacts: the following size 16 contacts are recessed 5mm [0.197 inch] below the face of the female connector insulator per safety requirements. pcih38: contact positions 37 and 38. pcih47 and pcih49 with mos: contact positions 46 and 47. compliant terminations: size 16, 20 and 22 contacts are available with compliant contact terminations. printed board and panel mounting: mounting holes provided in connector body for both printed board and panel mounting. self-tapping screws are available. mechanical operations: 250 couplings, minimum. climatic characteristics: working temperature: -55?c to +125?c. u.l. recognized file #e49351 csa recognized file #lr54219 tuv recognized file #215/99 p o s i t r o n i c i n d u s t r i e s ? p e r e u d i r e c t i v e 2 0 0 2 / 9 5 / e c ? rohs r o h s compliant for rohs options see page 36. technical characteristics
15 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 24.53 [0.966] ref. 22.30 [0.878] ref. 19.70 [0.776] ref. 17.47 [0.688] ref. pcih connector mating dimensions (fully mated) straight board mount male to straight board mount or panel mount female straight board mount male to right angle (90? board mount female right angle (90? board mount male to straight board mount or panel mount female right angle (90? board mount male to right angle (90? board mount female 18.51 [0.729] 18.71 [0.736] 2x ?2.54 [?0.100] 88.00 [3.465] 2x ?2.54 [?0.100] 12.54 [0.494] 12.54 [0.494] 88.00 [3.465] 93.82 [3.694] 7.04 [0.277] 93.82 [3.694] 6.02 [0.237] 2x ?2.54 [?0.100] 13.68 [0.539] 16.48 [0.649] 17.49 [0.689] 20.29 [0.799] 91.03 [3.584] 91.04 [3.584] 85.00 [3.346] 2x ?2.54 [?0.100] 85.00 [3.346] 12.54+0.13-0.38 [0.494+0.005-0.015] 12.54+0.13-0.38 [0.494+0.005-0.015] male connector female connector pcih connector outline dimensions right angle (90? board mount connector straight board mount connector see page 29 for panel mount connector dimensions. male connector female connector connector outline and mating dimensions
2x size 16 contacts 5 mm recess 15x ?0.61 [0.024] 16.19 [0.637] (see page 23) r dered separately crimp contacts 3x ?4.19 [0.165] c'bore 6.32 [0.249] 12.00 [0.472] 2.125 [0.0837] 4.25 [0.167] 2.83 [0.111] 2x 6.85 [0.270] 2x 2.50 [0.098] 9x 4.25 [0.167] 1.00 [0.039] 2.00 [0.079] 4.25 [0.167] 2x 44.00 [1.732] 8x 4.00 [0.157] 17.19 [0.677] high profile a.c. pass-through, cutout 35x 4.50 [0.177] 20x ?1.14 [0.045] contact hole pattern connector dimensions female straight solder connector with a.c. pass-through code 3 with mos * -245.0 crimp contacts are not supplied with connector and must be ordered separately high profile part number pcih38f300a1-245.0 * for mos descriptions, see chart on pages 111-112. crimp contacts ordered separately (see pages 102-103) c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 16 dimensions are in millimeters [inches]. all dimensions are subject to change. 2.125 [0.0837] 4.25 [0.167] 9x 4.25 [0.167] 1.00 [0.039] 27.50 [1.083] 32.50 [1.280] 37.50 [1.476] 2x 2.50 [0.098] 2x size 16 contacts 5 mm min. recess 8x 4.00 [0.157] 2.00 [0.079] 2x 44.00 [1.732] 4.25 [0.167] 38x 4.50 [0.177] 23x ?1.14 [0.045] 15x ?0.61 [0.024] connector dimensions female straight solder connector code 3 standard part number pcih38f300a1 contact hole pattern suggested printed bo ard hole sizes: suggest 1.00 [0.039] holes for size 20 and size 22 contact holes. suggest 1.60 [0.063] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. straight solder connector, female
17 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 3x ?3.30 [0.130] minimum a.c. pass-through holes 35x 4.50 [0.177] 2x size 16 contacts 5 mm recess c r i mp c on t ac t s ordered separately (see page 23) 20x ?1.14 [0.045] 15x ?0.61 [0.024] 2.125 [0.0837] 4.25 [0.167] 9x 4.25 [0.167] 1.00 [0.039] 27.50 [1.083] 32.50 [1.280] 37.50 [1.476] 2x 2.50 [0.098] 2.00 [0.079] 8x 4.00 [0.157] 2x 44.00 [1.732] 4.25 [0.167] connector dimensions contact hole pattern female straight solder connector with a.c. pass-through code 3 with mos * -246.1 crimp contacts are not supplied with connector and must be ordered separately low profile part number pcih38f300a1-246.1 suggested printed bo ard hole sizes: suggest 1.00 [0.039] holes for size 20 and size 22 contact holes. suggest 1.60 [0.063] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. straight solder connector, female 0.20 [0.008] 2.125 [0.0837] 37.70 [1.484] 32.65 [1.285] 27.60 [1.087] 9x 4.20 [0.165] 2x size 16 contacts 5 mm min. recess 2x 2.70 [0.106] 2x 44.00 [1.732] 7x 2.70 [0.106] 4.10 [0.161] 4.25 [0.167] 47x 4.50 [0.177] 23x ?1.14 [0.045] 24x ?0.61 [0.024] female straight solder connector code 3 standard part number pcih47f300a1 contact hole pattern connector dimensions crimp contacts ordered separately (see pages 102-103) * for mos descriptions, see chart on pages 111-112.
c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 18 dimensions are in millimeters [inches]. all dimensions are subject to change. 3x ?3.30 [0.130] minimum a.c. pass-through holes 44x 4.50 [0.177] 2x size 16 contacts 5 mm recess crimp contacts ordered separately (see page 23) 24x ?0.61 [0.024] 20x ?1.14 [0.045] 0.20 [0.008] 9x 4.20 [0.165] 27.60 [1.087] 32.65 [1.285] 37.70 [1.484] 4.25 [0.167] 2.125 [0.0837] 2x 44.00 [1.732] 4.10 [0.161] 7x 2.70 [0.106] 2x 2.70 [0.106] female straight solder connector with a.c. pass-through code 3 with mos * -246.0 crimp contacts are not supplied with connector and must be ordered separately low profile part number pcih47f300a1-246.0 contact hole pattern connector dimensions 5x ?3.30 [0.130] minimum a.c. pass-through holes 44x 4.50 [0.177] 24x ?0.61 [0.024] crimp contacts ordered separately (see page 23) 20x ?1.14 [0.045] 32.65 [1.285] 37.70 [1.484] 7x 2.70 [0.106] 2x 44.00 [1.732] 2.13 [0.084] 4.25 [0.167] 27.60 [1.087] 2x 2.70 [0.106] 9x 4.20 [0.165] 4.10 [0.161] 0.20 [0.008] 4x size 16 contacts 5 mm recess connector dimensions contact hole pattern note: see below for suggested printed board hole sizes. suggested printed bo ard hole sizes: suggest 1.00 [0.039] holes for size 20 and size 22 contact holes. suggest 1.60 [0.063] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. female straight solder connector with a.c. pass-through code 3 with mos * -246.3 crimp contacts are not supplied with connector and must be ordered separately low profile part number pcih49w25f300a1-246.3 straight solder connector, female crimp contacts ordered separately (see pages 102-103) crimp contacts ordered separately (see pages 102-103) * for mos descriptions, see chart on pages 111-112. * for mos descriptions, see chart on pages 111-112.
19 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 37.70 [1.484] 32.65 [1.285] 27.60 [1.087] 9x 4.20 [0.165] 2.125 [0.0837] 0.20 [0.008] 2x 2.70 [0.106] 4.10 [0.161] 7x 2.70 [0.106] 2x 44.00 [1.732] 4.25 [0.167] 49x 4.50 [0.177] 24x ?0.61 [0.024] 25x ?1.14 [0.045] 4x size 16 contacts 5mm recessed min. female straight solder connector code 3 with mos * -379.0 standard part number pcih49w25f300a1-379.0 contact hole pattern connector dimensions suggested printed bo ard hole sizes: suggest 1.00 [0.039] holes for size 20 and size 22 contact holes. suggest 1.60 [0.063] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. straight solder connector, female * for mos descriptions, see chart on pages 111-112.
c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 20 dimensions are in millimeters [inches]. all dimensions are subject to change. 2x 2.70 [0.106] 37.70 [1.484] 27.60 [1.087] 2.125 [0.0837] 4.25 [0.167] second mate 7x 2.70 [0.106] 4.10 [0.161] position 27 last to mate signal 2x 44.00 [1.732] 32.65 [1.285] 23x ?1.14 [0.045] 24x ?0.61 [0.024] 47x 4.50 [0.177] first mate 9x 4.20 [0.165] 0.20 [0.008] position 22,25,28 last to mate signal 37.50 [1.476] 32.50 [1.280] 27.50 [1.083] 1.00 [0.039] 2x 44.00 [1.732] 8x 4.00 [0.157] 2.00 [0.079] 4.25 [0.167] 9x 4.25 [0.167] 2.125 [0.0837] 4.25 [0.167] second mate first mate 15x ?0.61 [0.024] 23x ?1.14 [0.045] 38x 4.50 [0.177] 2x 2.50 [0.098] male straight solder connector code 3 standard part number pcih38m300a1 male straight solder connector code 3 standard part number pcih47m300a1 contact hole pattern contact hole pattern connector dimensions connector dimensions suggested printed bo ard hole sizes: suggest 1.00 [0.039] holes for size 20 and size 22 contact holes. suggest 1.60 [0.063] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. straight solder connector, male
21 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series position 27 last to mate signal 32.65 [1.285] 2x 44.00 [1.732] 0.20 [0.008] positions 46, 47, 48, 49 second mate position 45 first mate 25x ?1.14 [0.045] 24x ?0.61 [0.024] 49x 4.50 [0.177] 27.60 [1.087] 9x 4.20 [0.165] 2x 2.70 [0.106] 4.25 [0.167] 2.125 [0.0837] 4.10 [0.161] 7x 2.70 [0.106] 37.70 [1.484] suggested printed bo ard hole sizes: suggest 1.00 [0.039] holes for size 20 and size 22 contact holes. suggest 1.60 [0.063] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. contact hole pattern male straight solder connector code 3 with mos * -378.0 standard part number pcih49w25m300a1-378.0 connector dimensions note: see below for suggested printed board hole sizes. straight solder connector, male * for mos descriptions, see chart on pages 111-112.
c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 22 dimensions are in millimeters [inches]. all dimensions are subject to change. 2x 42.50 [1.673] 12.59 [0.496] 10.09 [0.397] 7.59 [0.299] 2.00 [0.079] 4.25 [0.167] 32.50 [1.280] 12.21 [0.481] 7.96 [0.313] 2x size 16 contacts 5 mm min. recess 15x ?0.71 [0.028] 23x ?1.60 [0.063] 2x 42.50 [1.673] 38x 2.68 [0.106] 8x 4.00 [0.157] 23x ?1.60 [0.063] 15x ?0.71 [0.028] pcih38f400a1 37.50 [1.476] 14.710.65 [0.5790.026] 27.50 [1.083] 1.00 [0.039] 9x 4.25 [0.167] inverted part number: 38x 2.68 [0.106] 2x size 16 contacts 5 mm min. recess 37.50 [1.476] 32.50 [1.280] 27.50 [1.083] 1.00 [0.039] 9x 4.25 [0.167] 12.21 [0.481] 7.96 [0.313] 12.59 [0.496] 10.09 [0.397] 2.00 [0.079] 4.25 [0.167] 8x 4.00 [0.157] 7.59 [0.299] 14.710.65 [0.5790.026] female right angle (90? board mount connector code 4 standard part number pcih38f400a1 contact hole pattern connector dimensions connector dimensions contact hole pattern suggested printed bo ard hole sizes: suggest 1.14 [0.045] holes for size 20 contact holes. suggest 2.03 [0.080] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. right angle (90? board mount connector, female female right angle (90? board mount connector code 4 part number for inverted termination pcih38rf400a1
23 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 24x ?0.71 [0.028] 23x ?1.60 [0.063] 7.39 [0.291] 10.09 [0.397] 12.79 [0.504] 37.70 [1.484] 32.65 [1.285] 27.60 [1.087] 9x 4.20 [0.165] 7.96 [0.313] 2x size 16 contacts 5 mm min. recess 47x 2.68 [0.106] 24x ?0.71 [0.028] 2x 42.50 [1.673] 7x 2.70 [0.106] 4.10 [0.161] 12.21 [0.481] 14.710.65 [0.5790.026] 0.20 [0.008] pcih47f400a1 inverted part number: 47x 2.68 [0.106] 23x ?1.60 [0.063] 7.96 [0.313] 12.21 [0.481] 37.70 [1.484] 32.65 [1.285] 27.60 [1.087] 9x 4.20 [0.165] 12.79 [0.504] 10.09 [0.397] 7.39 [0.291] 2x 42.50 [1.673] 7x 2.70 [0.106] 4.10 [0.161] 0.20 [0.008] 14.710.65 [0.5790.026] 2x size 16 contacts 5 mm min. recess connector dimensions connector dimensions female right angle (90? board mount connector code 4 standard part number pcih47f400a1 contact hole pattern contact hole pattern suggested printed bo ard hole sizes: suggest 1.14 [0.045] holes for size 22 contact holes. suggest 2.03 [0.080] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. female right angle (90? board mount connector code 4 part number for inverted termination pcih47rf400a1 right angle (90? board mount connector, female
c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 24 dimensions are in millimeters [inches]. all dimensions are subject to change. 24x ?0.71 [0.028] 44x 2.68 [0.106] 20x ?1.60 [0.063] 7.96 [0.313] 12.21 [0.481] 37.70 [1.484] 32.65 [1.285] 27.60 [1.087] 9x 4.20 [0.165] 12.79 [0.504] 10.09 [0.397] 7.39 [0.291] 2x 42.50 [1.673] 7x 2.70 [0.106] 4.10 [0.161] 0.20 [0.008] 14.710.65 [0.5790.026] 2x size 16 contacts 5 mm min. recess 20x ?1.60 [0.063] 7.39 [0.291] 10.09 [0.397] 12.79 [0.504] 37.70 [1.484] 32.65 [1.285] 27.60 [1.087] 9x 4.20 [0.165] 7.96 [0.313] 2x size 16 contacts 5 mm min. recess 44x 2.68 [0.106] 24x ?0.71 [0.028] 2x 42.50 [1.673] 7x 2.70 [0.106] 4.10 [0.161] 12.21 [0.481] 14.710.65 [0.5790.026] 0.20 [0.008] contact hole pattern contact hole pattern connector dimensions connector dimensions female right angle (90? board mount connector with a.c. pass-through code 4 with mos * -246.4 crimp contacts are not supplied with connector and must be ordered separately part number for inverted termination pcih47rf400a1-246.4 female right angle (90? board mount connector with a.c. pass-through code 4 with mos * -246.4 crimp contacts are not supplied with connector and must be ordered separately standard part number pcih47f400a1-246.4 suggested printed bo ard hole sizes: suggest 1.14 [0.045] holes for size 22 contact holes. suggest 2.03 [0.080] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. right angle (90? board mount connector, female crimp contacts ordered separately (see pages 102-103) crimp contacts ordered separately (see pages 102-103) * for mos descriptions, see chart on pages 111-112. * for mos descriptions, see chart on pages 111-112.
25 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 24x ?0.71 [0.028] 49x 2.68 [0.106] 25x ?1.60 [0.063] 7.96 [0.313] 12.21 [0.481] 37.70 [1.484] 32.65 [1.285] 27.60 [1.087] 9x 4.20 [0.165] 12.79 [0.504] 10.09 [0.397] 7.39 [0.291] 2x 42.50 [1.673] 7x 2.70 [0.106] 4.10 [0.161] 0.20 [0.008] 14.710.65 [0.5790.026] 4x size 16 contacts 5mm recessed min. female right angle (90? board mount connector code 4 with mos * -379.0 standard part number pcih49w25f400a1-379.0 24x ?0.71 [0.028] 49x 2.68 [0.106] 25x ?1.60 [0.063] 14.71?.65 [0.579?.026] 4x size 16 contacts 5 mm min. recess 0.20 [0.008] 27.60 [1.087] 32.65 [1.285] 37.70 [1.484] 9x 4.20 [0.165] 4.10 [0.161] 7x 2.70 [0.106] 2x 42.50 [1.673] 12.79 [0.504] 10.09 [0.397] 7.38 [0.291] 12.21 [0.481] 7.96 [0.313] female right angle (90? board mount connector code 4 with mos * -379.0 part number for inverted termination pcih49w25rf400a1-379.0 suggested printed bo ard hole sizes: suggest 1.14 [0.045] holes for size 22 contact holes. suggest 2.03 [0.080] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. connector dimensions contact hole pattern contact hole pattern connector dimensions note: see below for suggested printed board hole sizes. right angle (90? board mount connector, female * for mos descriptions, see chart on pages 111-112. * for mos descriptions, see chart on pages 111-112.
c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 26 dimensions are in millimeters [inches]. all dimensions are subject to change. 15x ?0.71 [0.028] 23x ?1.60 [0.063] 12.59 [0.496] 10.09 [0.397] 7.59 [0.299] 2x 42.50 [1.673] 8x 4.00 [0.157] 2.00 [0.079] 4.25 [0.167] second mate first mate 15x ?0.71 [0.028] 23x ?1.60 [0.063] 38x 2.68 [0.106] positions 22,25,28 last to mate signal 27.50 [1.083] 32.50 [1.280] 37.50 [1.476] 14.710.65 [0.5790.026] inverted part number: pcih38m400a1 9x 4.25 [0.167] 1.00 [0.039] 12.21 [0.481] 7.96 [0.313] 37.50 [1.476] 27.50 [1.083] 1.00 [0.039] 2x 42.50 [1.673] 8x 4.00 [0.157] 2.00 [0.079] 4.25 [0.167] 9x 4.25 [0.167] 12.21 [0.481] 38x 2.68 [0.106] positions 22,25,28 mate signal last to second mate first mate 7.96 [0.313] 14.710.65 [0.5790.026] 12.59 [0.496] 10.09 [0.397] 7.59 [0.299] 32.50 [1.280] male right angle (90? board mount connector code 4 standard part number pcih38m400a1 contact hole pattern connector dimensions contact hole pattern connector dimensions suggested printed bo ard hole sizes: suggest 1.14 [0.045] holes for size 20 contact holes. suggest 2.03 [0.080] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. right angle (90? board mount connector, male male right angle (90? board mount connector code 4 part number for inverted termination pcih38rm400a1
27 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 47x 2.68 [0.106] 14.710.65 [0.5790.026] second mate first mate 24x ?0.71 [0.028] 23x ?1.60 [0.063] position 27 mate signal last to 9x 4.20 [0.165] 27.60 [1.087] 32.65 [1.285] 37.70 [1.484] 12.79 [0.504] 10.09 [0.397] 7.39 [0.291] 2x 42.50 [1.673] 7x 2.70 [0.106] 4.10 [0.161] 0.20 [0.008] 7.96 [0.313] 12.21 [0.481] position 27 last to mate signal 23x ?1.60 [0.063] 47x 2.68 [0.106] 24x ?0.71 [0.028] second mate first mate 14.710.65 [0.5790.026] 37.70 [1.484] 7.39 [0.291] 10.09 [0.397] 12.79 [0.504] 7x 2.70 [0.106] 4.10 [0.161] 2x 42.50 [1.673] 7.96 [0.313] 0.20 [0.008] 32.65 [1.285] 27.60 [1.087] 9x 4.20 [0.165] 12.21 [0.481] male right angle (90? board mount connector code 4 standard part number pcih47m400a1 male right angle (90? board mount connector code 4 part number for inverted termination pcih47rm400a1 connector dimensions contact hole pattern contact hole pattern connector dimensions suggested printed bo ard hole sizes: suggest 1.14 [0.045] holes for size 22 contact holes. suggest 2.03 [0.080] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. right angle (90? board mount connector, male
c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 28 dimensions are in millimeters [inches]. all dimensions are subject to change. 25x ?1.60 [0.063] 49x 2.68 [0.106] 24x ?0.71 [0.028] position 27 last to mate signal 14.710.65 [0.5790.026] 7.96 [0.313] 10.09 [0.397] 7.39 [0.291] 12.21 [0.481] 37.70 [1.484] 12.79 [0.504] 2x 42.50 [1.673] 4.10 [0.161] 7x 2.70 [0.106] 27.60 [1.087] 32.65 [1.285] 9x 4.20 [0.165] 0.20 [0.008] positions 46, 47, 48, 49 second mate position 45 first mate male right angle (90? board mount connector code 4 with mos * -378.0 standard part number pcih49w25m400a1-378.0 connector dimensions contact hole pattern suggested printed bo ard hole sizes: suggest 1.14 [0.045] holes for size 20 contact holes. suggest 2.03 [0.080] holes for size 16 contact holes. suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see below for suggested printed board hole sizes. right angle (90? board mount connectors, male * for mos descriptions, see chart on pages 111-112.
2x 3.56?.08 [?.140?.003] 82.34 [3.242] 2x 3.83 [0.151] 6.85 [0.270] 13.70 [0.539] 96.36 [3.794] 90.00 [3.543] 2x ?.54 [?.100] 12.54 [0.494] 6.02 [0.237] 12.00 [0.472] 2x size 16 contacts 5 mm recess 12.69 [0.500] 20x 3.56 [0.140] c'bore 3x 4.19 [0.165] c'bore 2x 3.56?.08 [?.140?.003] 82.34 [3.242] 2x 3.83 [0.151] 6.85 [0.270] 13.70 [0.539] 6.02 [0.237] 12.00 [0.472] 90.00 [3.543] 96.36 [3.794] 12.54 [0.494] 2x ?.54 [?.100] 2x size 16 contacts 5mm recess 12.69 [0.500] 20x 3.56 [0.140] c'bore 3x 4.19 [0.165] c'bore female panel mount crimp contact connectors code 8 contacts are not supplied with connector and must be ordered separately standard part number pcih47f8000 panel cut out panel cut out connector dimensions connector dimensions 29 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series female panel mount crimp contact connectors code 8 contacts are not supplied with connector and must be ordered separately standard part number pcih38f8000 panel mount connectors, female for information regarding removable contacts, see removable contact section, pages 102-103.
20x size 16 bi-spring style press-fit contacts 15x size 20 omega style press-fit contacts 35x "l" (see below) 6.32 [0.249] 12.00 [0.472] 2x size 16 contacts 5 mm recess 16.19 [0.637] 3x ?.19 [0.165] c'bore 2x 6.85 [0.270] 2.83 [0.111] 1.00 [0.039] 9x 4.25 [0.167] 17.19 [0.677] high profile a.c. pass-through, cutout 2.125 [0.0837] 4.25 [0.167] 8x 4.00 [0.157] 2.00 [0.079] 4.25 [0.167] 2x 2.50 [0.098] 2x 44.00 [1.732] female compliant press-fit connector with a.c. pass-through code 93 or 94 with mos * -245.0 crimp contacts are not supplied with connector and must be ordered separately high profile part number pcih38f9300a1-245.0 pcih38f9400a1-245.0 connector dimensions contact hole pattern contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] suggested printed bo ard hole sizes: suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. for press-fit connector installation tools, see pages 108-109. for mounting screw options, see page 108. crimp contacts ordered separately (see pages 102-103) c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 30 dimensions are in millimeters [inches]. all dimensions are subject to change. 15x size 20 contacts 27.50 [1.083] 32.50 [1.280] 37.50 [1.476] 38x "l" (see below) 4.25 [0.167] 8x 4.00 [ 0.157 ] 2x 2.50 [0.098] 2x size 16 contacts 5 mm min. recess 2.125 [0.0837] 2.00 [0.079] 4.25 [0.167] 2x 44.00 [1.732] 9x 4.25 [0.167] 1.00 [0.039] 15x size 20 omega style press-fit contacts 27.50 [1.083] 32.50 [1.280] 37.50 [1.476] 38x "l" (see below) 4.25 [0.167] 8x 4.00 [0.157] 2x 2.50 [0.098] 2x size 16 contacts 5 mm min. recess 2.125 [0.0837] 2.00 [0.079] 4.25 [0.167] 2x 44.00 [1.732] 9x 4.25 [0.167] 1.00 [0.039] 23x size 16 bi-spring style press-fit contacts connector dimensions contact hole pattern female compliant press-fit connector code 93 or 94 standard part number pcih38f9300a1 pcih38f9400a1 contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] compliant press-fit board mount connector, female note: see below for suggested printed board hole sizes, press-fit connector installation tools, and mounting screw options. * for mos descriptions, see chart on pages 111-112.
37.50 [1.476] 35x "l" (see below) 32.50 [1.280] 27.50 [1.083] 8x 4.00 [0.157] 2.00 [0.079] 2x size 16 contacts 5 mm recess 2x 2.50 [0.098] 4.25 [0.167] 2.125 [0.0837] 9x 4.25 [0.167] 1.00 [0.039] 2x 44.00 [1.732] 20x size 16 bi-spring style press-fit contacts 4.25 [0.167] minimum a.c. pass-through holes 3x ?.30 [0.130] 15x size 20 omega style press-fit contacts 31 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series female compliant press-fit connector with a.c. pass-through code 93 or 94 with mos * -246.1 crimp contacts are not supplied with connector and must be ordered separately low profile part number pcih38f9300a1-246.1 pcih38f9400a1-246.1 connector dimensions contact hole pattern contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] compliant press-fit board mount connector, female crimp contacts ordered separately (see pages 102-103) 32.65 [1.285] 37.70 [1.484] 47x "l" (see below) 4.25 [0.167] 7x 2.70 [0.106] 4.10 [0.161] 2.125 [0.0837] 2x 2.70 [0.106] 2x size 16 contacts 5 mm min. recess 9x 4.20 [0.165] 27.60 [1.087] 2x 44.00 [1.732] 0.20 [0.008] 23x size 16 bi-spring style press-fit contacts 24x size 22 omega style press-fit contacts connector dimensions contact hole pattern female compliant press-fit connector code 93 or 94 standard part number pcih47f9300a1 PCIH47F9400A1 contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] suggested printed bo ard hole sizes: suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. for press-fit connector installation tools, see pages 108-109. for mounting screw options, see page 108. note: see below for suggested printed board hole sizes, press-fit connector installation tools, and mounting screw options. * for mos descriptions, see chart on pages 111-112.
suggested printed bo ard hole sizes: suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. for press-fit connector installation tools, see pages 108-109. for mounting screw options, see page 108. note: see below for suggested printed board hole sizes, press-fit connector installation tools, and mounting screw options. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 32 dimensions are in millimeters [inches]. all dimensions are subject to change. 37.70 [1.484] 32.65 [1.285] 27.60 [1.087] 7x 2.70 [0.106] 0.20 [0.008] 5x ?.30 [0.130] minimum a.c. pass-through holes 2x 2.70 [0.106] 24x size 22 omega style press-fit contacts 44x "l" (see below) 9x 4.20 [0.165] 4.25 [0.167] 2.125 [0.0837] 4.10 [0.161] 2x 44.00 [1.732] 4x size 16 contacts 5 mm recess 20x size 16 bi-spring style press-fit contacts female compliant press-fit connector with a.c. pass-through code 93 or 94 with mos * -246.3 crimp contacts are not supplied with connector and must be ordered separately low profile part number pcih49w25f9300a1-246.3 pcih49w25f9400a1-246.3 connector dimensions contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] 44x "l" (see below) 32.65 [1.285] 27.60 [1.087] 7x 2.70 [0.106] 37.70 [1.484] minimum a.c. pass-through holes 2x size 16 contacts 5 mm recess 2x 2.70 [0.106] 4.10 [0.161] 2x 44.00 [1.732] 2.125 [0.0837] 4.25 [0.167] 9x 4.20 [0.165] 3x ?.30 [0.130] 0.20 [0.008] 20x size 16 bi-spring style press-fit contacts 24x size 22 omega style press-fit contacts female compliant press-fit connector with a.c. pass-through code 93 or 94 with mos * -246.0 crimp contacts are not supplied with connector and must be ordered separately low profile part number pcih47f9300a1-246.0 PCIH47F9400A1-246.0 connector dimensions contact hole pattern contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] compliant press-fit board mount connector, female crimp contacts ordered separately (see pages 102-103) crimp contacts ordered separately (see pages 102-103) contact hole pattern * for mos descriptions, see chart on pages 111-112. * for mos descriptions, see chart on pages 111-112.
33 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 2x 44.00 [1.732] 2x 2.70 [0.106] 2.125 [0.0837] 4.10 [0.161] 7x 2.70 [0.106] 4.25 [0.167] 37.70 [1.484] 49x "l" (see below) 32.65 [1.285] 27.60 [1.087] 0.20 [0.008] 9x 4.20 [0.165] 4x size 16 contacts 5 mm recess 24x size 22 omega style press-fit contacts 25x size 16 bi-spring style press-fit contacts female compliant press-fit connector code 93 or 94 with mos * -379.0 standard part number pcih49w25f9300a1-379.0 pcih49w25f9400a1-379.0 contact hole pattern connector dimensions compliant press-fit board mount connector, female suggested printed bo ard hole sizes: suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. for press-fit connector installation tools, see pages 108-109. for mounting screw options, see page 108. contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] * for mos descriptions, see chart on pages 111-112.
c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 34 dimensions are in millimeters [inches]. all dimensions are subject to change. 47x "l" (see below) 37.70 [1.484] 0.20 [0.008] 4.10 [0.161] 7x 2.70 [0.106] 27.60 [1.087] 32.65 [1.285] 2x 44.00 [1.732] 2.125 [0.0837] position 27 last to mate signal first mate 9x 4.20 [0.165] second mate 4.25 [0.167] 2x 2.70 [0.106] 4.25 [0.167] 2.00 [0.079] 8x 4.00 [0.157] 1.00 [0.039] 27.50 [1.083] 32.50 [1.280] 37.50 [1.476] 38x "l" (see below) 2.125 [0.0837] position 22,25,28 last to mate signal 23x size 16 bi-spring style press-fit contacts 24x size 22 omega style press-fit contacts first mate 4.25 [0.167] 9x 4.25 [0.167] 2x 44.00 [1.732] 23x size 16 bi-spring style press-fit contacts 15x size 20 omega style press-fit contacts 2x 2.50 [0.098] second mate connector dimensions contact hole pattern male compliant press-fit connector code 93 or 94 standard part number pcih38m9300a1 pcih38m9400a1 connector dimensions contact hole pattern male compliant press-fit connector code 93 or 94 standard part number pcih47m9300a1 pcih47m9400a1 compliant press-fit board mount connector, male suggested printed bo ard hole sizes: suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. for press-fit connector installation tools, see pages 108-109. for mounting screw options, see page 108. note: see below for suggested printed board hole sizes, press-fit connector installation tools, and mounting screw options. contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.]
35 dimensions are in millimeters [inches]. all dimensions are subject to change. c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 49x "l" (see below) 37.70 [1.484] 0.20 [0.008] 4.10 [0.161] 7x 2.70 [0.106] 27.60 [1.087] 32.65 [1.285] 2x 44.00 [1.732] 2.125 [0.0837] position 27 last to mate signal 9x 4.20 [0.165] 4.25 [0.167] 2x 2.70 [0.106] positions 46, 47, 48, 49 second mate position 45 first mate 24x size 22 omega style press-fit contacts 25x size 16 bi-spring style press-fit contacts male compliant press-fit connector code 93 or 94 with mos * -378.0 standard part number pcih49w25m9300a1-378.0 pcih49w25m9400a1-378.0 contact hole pattern connector dimensions enlarged detail of compliant contact terminations compliant press-fit board mount connector, male suggested printed bo ard hole sizes: suggest 3.56?.08 [0.140?.003] holes for connector mounting holes. note: see page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. for press-fit connector installation tools, see pages 108-109. for mounting screw options, see page 108. contact tail length code ? length board thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] * for mos descriptions, see chart on pages 111-112.
c ompact p ower c onnectors positronic industries connectpositronic.com pcih series 36 dimensions are in millimeters [inches]. all dimensions are subject to change. step 1 - basic series pcih - pcih series step 3 - connector gender f - female m - male 1 2 3 4 5 6 7 8 pcih 47 f 93 0 0 a1 /aa 9 ordering information - code numbering system specify complete connector by selecting an option from step 1 through 7 step 6 - hoods 0 - not applicable step 5 - mounting style 0 - not applicable see page 108 for mounting screw options. step 4 - contact termination type 3 - solder, straight printed board mount with 4.50 [0.177] tail extension for connection systems 1 and 2. 4 - solder, right angle (90? printed board mount with 2.68 [0.106] tail extension for connection systems 1, 2, 3 and 4. ** 8 - contacts must be ordered separately for panel mount cable connectors, connection system 3, see pages 102-103. female connector only. 93 - press-fit, compliant termination size 16 and size 20 or size 22 straight printed board mount for use with board thicknesses of 2.29 to 4.45 [0.090 to 0.175]. connection systems 1 and 2. 94 - press-fit, compliant termination size 16 and size 20 or size 22 straight printed board mount for use with board thickness of 4.45 minimum [0.175 minimum]. connection systems 1 and 2. step 2 - connector variants 38 - 23 size 16 contacts and 15 size 20 contacts 38r - 23 size 16 contacts and 15 size 20 contacts inverted termination style, use with contact type ? 47 - 23 size 16 contacts and 24 size 22 contacts 47r - 23 size 16 contacts and 24 size 22 contacts inverted termination style, use with contact type ? 49w25 - 25 size 16 contacts and 24 size 22 contacts *49w25r - 25 size 16 contacts and 24 size 22 contacts inverted termination style, use with contact type ? step step 8 - environmental compliance options /aa - compliant per eu directive 2002/95/ec (rohs) step 7 - contact plating for printed board type connectors 0 - crimp contacts ordered separately a1 - gold flash over nickel on mating end and termination end. a2 - gold flash over nickel on mating end and 5.00 microns [0.00020 inch] tin-lead solder coat on termination end. not available with code 93 or code 94 in step 4. c1 - 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end. c2 - 0.76 microns [0.000030 inch] gold over nickel on mating end and 5.00 microns [0.00020 inch] tin-lead solder coat on termination end. not available with code 93 or code 94 in step 4. d1 - 1.27 microns [0.000050 inch] gold over nickel on mating end and termination end. d2 - 1.27 microns [0.000050 inch] gold over nickel on mating end and 5.00 microns [0.00020 inch] tin-lead solder coat on termination end. not available with code 93 or code 94 in step 4. * female contact variants are readily available. contact technical sales for availability of male contact variants. ** available for 38 and 47 variants. contact technical sales for availability of 49w25 variant. example note: if compliance to environmental legislation is not required, this step will not be used. example: pcih47f9300a1 step 9 - special options for listing of special options, see special options appendix on pages 111 and 112. p o s i t r o n i c i n d u s t r i e s ? p e r e u d i r e c t i v e 2 0 0 2 / 9 5 / e c ? rohs r o h s compliant note: once you have made a connector selection, contact technical sales if you would like to receive a drawing in dxf, pdf format or a 3-dimensional iges file. sk drawing 3-dimensional model pcih ordering information

▲Up To Search▲

Price & Availability of PCIH47F9400A1

	To Download PCIH47F9400A1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .